Epoxy Resin

Epoxy Resin

Company of Statesville add 100 jobs laboratory furniture in Statesville an old laboratory furniture manufacturer announced Wednesday it will add 100 full-time jobs, investing 13 million U.S. dollars to expand operations and renew its corporate headquarters in the next five years.

EPOXY RESIN 4 CLEAR COATING COUNTER TOPS BAR TABLE TOPS $630.88

MARINE GRADE EPOXY RESIN – 15 GALLON KIT W/LID & RIEKE SPOUT $599.99

EPOXY RESIN GLUE BOAT BUILDING NONE SAGGING 10 GAL KIT $454.19

EPOXY RESIN BOAT BUILDING STRUCTURAL MARINE GRADE 10GAL $440.93

EPOXY RESIN EPS SAFE FIBERGLASSING CRYSTAL CLEAR 7.5GAL $424.00

Sika – Sikadur 55 SLV Epoxy Resin Crack Sealer / Healer $359.97

MARINE GRADE EPOXY RESIN – 6 GALLON KIT $299.99

Epoxy Resin 1-1/2 Gallons Kit (Slow Cure Time) $208.94

Epoxy Resin1-1/2 Gallons Kit (Medium Cure Time) Epoxy $208.94

CARBON FIBER AND FIBERGLASS LAMINATING EPOXY RESIN KIT WITH METERING PUMPS! $181.00

Countertop epoxy resin clear $179.00

CARBON FIBER AND FIBERGLASS LAMINATING EPOXY RESIN KIT! $170.00

MARINE GRADE EPOXY RESIN – 3 GALLON KIT $159.99

Amazing Clear Cast Epoxy Casting Resin 2 gal $114.50

SEAMCO STONE BOND EPOXY RESIN (2) 2.839 LITER Part A $99.99

EPOXY RESIN ULTRA CLEAR VERY THIN HIGH HEAT TABLE TOP COUNTER TOP COATING 1.5 $95.55

EPOXY RESIN ULTRA CLEAR VERY THIN HEAT STABLE OUTDOOR SOLAR PANEL USE 1.5GAL KIT $95.55

EPOXY RESIN CLEAR 4 COATING CASTING HIGH IMPACT 1.5 GAL $93.31

EPOXY RESIN CRYSTAL CLEAR FAST SET FOR CASTING COATING $92.82

Lambert EPIWELD 580 Structural Epoxy Resin Part A and B $92.00

EPOXY RESIN SEALER WOOD ROT REPAIR WATER PROOF 1.5 GAL $86.74

EPOXY RESIN BOAT BUILDING MARINE GRADE HIGH IMPACT 2GAL $85.67

EPOXY RESIN AQUARIUM TANK & PONDS CONSTRUCTION 1.5 GAL $85.11

EPOXY RESIN CRYSTAL CLEAR CASTING IMBEDDING 1.5 GAL KIT $84.85

EPOXY RESIN GEL COAT REPAIR BLUE MEDIUM SET 1.5 GAL KIT $84.59

EPOXY RESIN WHITE GEL COAT REPAIR COATING 1.5 GAL KIT $82.90

EPOXY RESIN BLACK COATING GEL COAT REPAIR 1.5 GAL KIT $82.90

EPOXY RESIN GEL COAT REPAIR RED MEDIUM SET 1.5 Gal KIT $82.90

EPOXY RESIN GEL COAT REPAIR YELLOW MEDIUM SET 1.5 Gal $82.90

EPOXY RESIN OPAQUE BLACK CONCRETE GARAGE FLOOR COATING $82.57

EPOXY RESIN BLACK OR GRAY GARAGE CONCRETE FLOOR COATING $81.15

EPOXY RESIN FOR HIGH TEMPERATURE FIBERGLASSING 80 OZKIT $60.83

MARINE GRADE EPOXY RESIN – 1 GALLON KIT $59.99

EPOXY RESIN ULTRA CLEAR LOW YELLOWING UV STABLIZED RESIN COATING CASTING 3/4 GAL $49.55

EPOXY RESIN CRYSTAL CLEAR THIN HIGH GLOSS & IMPACT 96OZ $47.75

EPOXY RESIN 4 BUBBLE-FREE TABLE AND BAR TOP CLEAR COATS $46.99

EPOXY RESIN CRYSTAL CLEAR HIGH PERFORMANCE 96 OZ.KIT $46.65

EPOXY RESIN BOAT BUILDING MARINE GRADE 1 GALLON KIT $45.73

1 Gallon Laminating Epoxy Resin Kit …Unmodified Resin $45.00

EPOXY RESIN WOOD ROT REPAIR PENETRATING WATERPROOF SANDING SEALER 96 OZ KIT $44.90

EPOXY RESIN HULL REPAIR CONCRETE PATCH WOOD ROT FILLER $43.83

EPOXY RESIN BLACK COATING GEL COAT REPAIR 96 OUNCE KIT $43.34

EPOXY RESIN OPAQUE WHITE GEL COAT REPAIR 96 OUNCE KIT $43.34

EPOXY RESIN CIRCUIT BOARD POTTING COMPOUND WATERPROOF MASKING SEALANT 96 OZ KIT $39.71

EPOXY RESIN HIGH HEAT RESISTANT GLUE CAST FIBERGLASSING $32.41

EPOXY RESIN FOR CARBON FIBER ULTRA CLEAR THIN HEAT STABLE OUTDOOR USE 48 OZ KIT $32.13

EPOXY RESIN BLACK COATING GEL COAT REPAIR 48 OUNCE KIT $29.66

Old Modern Handicrafts 19-ft Two-person Red Cedar Kayak $3099.99 This tandem kayak is completely handcrafted and it typically takes about 500 hours to build one. Strips of cedars are joined together by hand, encapsulated in fiberglass, bonded in place with epoxy resin and coated with marine varnish.

Epoxy Resin

West System #105 Epoxy Resin A Resin, Qt. $39.99 West System #105 Epoxy Resin A Resin, Qt. . 105 Epoxy Resin: The key component in a wide variety of boatbuilding, restoration, and repair projects 105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. The resin is a clear, light amber, low-viscosity liquid epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without “fisheyeing.” The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high flash poin

Mas Epoxies Flag Epoxy Resin Resin, Quart $42.99 Mas Epoxies Flag Epoxy Resin Resin, Quart . We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a “medium” body resin specifically designed to perform as an adhesive and structural laminating foundation. The medium viscosity allows for the incorporation of fillers when fairing putties, gluing slurries and filleting systems are required. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. This keeps fillets and fairing from slumping. FLAG Resin is next day sandable when cured at 60 degrees F. and higher with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener. Measured Properties Resin Viscosity 3000 3400 cps Color 1 Gardener Max EEW 190 200 Tg 140 F Mix Ratio 2:1 Resin to Hardener Peak Exotherm (30g batch) 360 F Pot Life (30g batch) 15 minutes

Interlux Epiglass Epoxy Resin Resin, Quart Kit $24.77 Interlux Epiglass Epoxy Resin Resin, Quart Kit . A 100% solids multipurpose epoxy resin for sealing gel coat and/or fiberglass laminate. This 2-part, high-build, clear epoxy coating lets you see that all dry fibers are saturated and sealed. Can be used in conjunction with InterProtect 2000E or InterProtect 3000. Standard Hardener is formulated for most conditions above 60F. Mix 4 parts resin to 1 quart of hardener. Also available in an easy-to-use Quart Kit which includes 1 quart of resin, hardener and mixing cups. Pumps are available for gallon packs Formulation: 4:1 mix ratio (one squirt from each pump) Drying Time: Pot Life (100 grams): Fast Hardener: 45 min. 50F; 14min. 77F; 8 min. 90F; Std. Hardener: NR 50F; 27 min. 77; 11 min. 95 Coverage: 139sq.ft./qt.; 559sq.ft./gal. (varies according to usage) Total Time to Full Cure: Thin film cure (100 grams): Fast Hardener: 7 hrs. 50F; 2.5 hrs. 77F; 45 in. 95F; Std. Hardener: 50F NR; 3.5 hrs. 77F; 1.75 hrs. 95F Application Method(s): Brush

Interlux Epiglass Epoxy Resin Resin, Pump (for Gallon) $41.99 Interlux Epiglass Epoxy Resin Resin, Pump (for Gallon) . A 100% solids multipurpose epoxy resin for sealing gel coat and/or fiberglass laminate. This 2-part, high-build, clear epoxy coating lets you see that all dry fibers are saturated and sealed. Can be used in conjunction with InterProtect 2000E or InterProtect 3000. Standard Hardener is formulated for most conditions above 60F. Mix 4 parts resin to 1 quart of hardener. Also available in an easy-to-use Quart Kit which includes 1 quart of resin, hardener and mixing cups. Pumps are available for gallon packs Formulation: 4:1 mix ratio (one squirt from each pump) Drying Time: Pot Life (100 grams): Fast Hardener: 45 min. 50F; 14min. 77F; 8 min. 90F; Std. Hardener: NR 50F; 27 min. 77; 11 min. 95 Coverage: 139sq.ft./qt.; 559sq.ft./gal. (varies according to usage) Total Time to Full Cure: Thin film cure (100 grams): Fast Hardener: 7 hrs. 50F; 2.5 hrs. 77F; 45 in. 95F; Std. Hardener: 50F NR; 3.5 hrs. 77F; 1.75 hrs. 95F Application Method(s)

Interlux Epiglass Epoxy Resin Resin, Gallon $124.99 Interlux Epiglass Epoxy Resin Resin, Gallon . A 100% solids multipurpose epoxy resin for sealing gel coat and/or fiberglass laminate. This 2-part, high-build, clear epoxy coating lets you see that all dry fibers are saturated and sealed. Can be used in conjunction with InterProtect 2000E or InterProtect 3000. Standard Hardener is formulated for most conditions above 60F. Mix 4 parts resin to 1 quart of hardener. Also available in an easy-to-use Quart Kit which includes 1 quart of resin, hardener and mixing cups. Pumps are available for gallon packs Formulation: 4:1 mix ratio (one squirt from each pump) Drying Time: Pot Life (100 grams): Fast Hardener: 45 min. 50F; 14min. 77F; 8 min. 90F; Std. Hardener: NR 50F; 27 min. 77; 11 min. 95 Coverage: 139sq.ft./qt.; 559sq.ft./gal. (varies according to usage) Total Time to Full Cure: Thin film cure (100 grams): Fast Hardener: 7 hrs. 50F; 2.5 hrs. 77F; 45 in. 95F; Std. Hardener: 50F NR; 3.5 hrs. 77F; 1.75 hrs. 95F Application Method(s): Brush or

West System #105 Epoxy Resin Resin, 52.03 Gal $3119 West System #105 Epoxy Resin Resin, 52.03 Gal . 105 Epoxy Resin: The key component in a wide variety of boatbuilding, restoration, and repair projects 105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. The resin is a clear, light amber, low-viscosity liquid epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without “fisheyeing.” The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high flash

West System #105 Epoxy Resin B Resin, Gal. $99.99 West System #105 Epoxy Resin B Resin, Gal. . 105 Epoxy Resin: The key component in a wide variety of boatbuilding, restoration, and repair projects 105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. The resin is a clear, light amber, low-viscosity liquid epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without “fisheyeing.” The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high flash poi

West System #105 Epoxy Resin C Resin, 4.35 Gal. $394.99 West System #105 Epoxy Resin C Resin, 4.35 Gal. . 105 Epoxy Resin: The key component in a wide variety of boatbuilding, restoration, and repair projects 105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. The resin is a clear, light amber, low-viscosity liquid epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without “fisheyeing.” The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high flas

Interlux Epiglass Epoxy Resin Standard Hardener, Quart $52.99 Interlux Epiglass Epoxy Resin Standard Hardener, Quart . A 100% solids multipurpose epoxy resin for sealing gel coat and/or fiberglass laminate. This 2-part, high-build, clear epoxy coating lets you see that all dry fibers are saturated and sealed. Can be used in conjunction with InterProtect 2000E or InterProtect 3000. Standard Hardener is formulated for most conditions above 60F. Mix 4 parts resin to 1 quart of hardener. Also available in an easy-to-use Quart Kit which includes 1 quart of resin, hardener and mixing cups. Pumps are available for gallon packs Formulation: 4:1 mix ratio (one squirt from each pump) Drying Time: Pot Life (100 grams): Fast Hardener: 45 min. 50F; 14min. 77F; 8 min. 90F; Std. Hardener: NR 50F; 27 min. 77; 11 min. 95 Coverage: 139sq.ft./qt.; 559sq.ft./gal. (varies according to usage) Total Time to Full Cure: Thin film cure (100 grams): Fast Hardener: 7 hrs. 50F; 2.5 hrs. 77F; 45 in. 95F; Std. Hardener: 50F NR; 3.5 hrs. 77F; 1.75 hrs. 95F Application Method(s)

Interlux Epiglass Epoxy Resin Fast Hardener, Quart $52.99 Interlux Epiglass Epoxy Resin Fast Hardener, Quart . A 100% solids multipurpose epoxy resin for sealing gel coat and/or fiberglass laminate. This 2-part, high-build, clear epoxy coating lets you see that all dry fibers are saturated and sealed. Can be used in conjunction with InterProtect 2000E or InterProtect 3000. Standard Hardener is formulated for most conditions above 60F. Mix 4 parts resin to 1 quart of hardener. Also available in an easy-to-use Quart Kit which includes 1 quart of resin, hardener and mixing cups. Pumps are available for gallon packs Formulation: 4:1 mix ratio (one squirt from each pump) Drying Time: Pot Life (100 grams): Fast Hardener: 45 min. 50F; 14min. 77F; 8 min. 90F; Std. Hardener: NR 50F; 27 min. 77; 11 min. 95 Coverage: 139sq.ft./qt.; 559sq.ft./gal. (varies according to usage) Total Time to Full Cure: Thin film cure (100 grams): Fast Hardener: 7 hrs. 50F; 2.5 hrs. 77F; 45 in. 95F; Std. Hardener: 50F NR; 3.5 hrs. 77F; 1.75 hrs. 95F Application Method(s): Br

Mas Epoxies Flag Epoxy Resin Resin, 1 Gallon $94.99 Mas Epoxies Flag Epoxy Resin Resin, 1 Gallon . We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a “medium” body resin specifically designed to perform as an adhesive and structural laminating foundation. The medium viscosity allows for the incorporation of fillers when fairing putties, gluing slurries and filleting systems are required. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. This keeps fillets and fairing from slumping. FLAG Resin is next day sandable when cured at 60 degrees F. and higher with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener. Measured Properties Resin Viscosity 3000 3400 cps Color 1 Gardener Max EEW 190 200 Tg 140 F Mix Ratio 2:1 Resin to Hardener Peak Exotherm (30g batch) 360 F Pot Life (30g batch) 15 minutes

Mas Epoxies Flag Epoxy Resin Resin, 4 Gallons $444.99 Mas Epoxies Flag Epoxy Resin Resin, 4 Gallons . We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a “medium” body resin specifically designed to perform as an adhesive and structural laminating foundation. The medium viscosity allows for the incorporation of fillers when fairing putties, gluing slurries and filleting systems are required. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. This keeps fillets and fairing from slumping. FLAG Resin is next day sandable when cured at 60 degrees F. and higher with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener. Measured Properties Resin Viscosity 3000 3400 cps Color 1 Gardener Max EEW 190 200 Tg 140 F Mix Ratio 2:1 Resin to Hardener Peak Exotherm (30g batch) 360 F Pot Life (30g batch) 15 minutes

Mas Epoxies Flag Epoxy Resin Resin, 1/2 Gallon $79.99 Mas Epoxies Flag Epoxy Resin Resin, 1/2 Gallon . We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a “medium” body resin specifically designed to perform as an adhesive and structural laminating foundation. The medium viscosity allows for the incorporation of fillers when fairing putties, gluing slurries and filleting systems are required. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. This keeps fillets and fairing from slumping. FLAG Resin is next day sandable when cured at 60 degrees F. and higher with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener. Measured Properties Resin Viscosity 3000 3400 cps Color 1 Gardener Max EEW 190 200 Tg 140 F Mix Ratio 2:1 Resin to Hardener Peak Exotherm (30g batch) 360 F Pot Life (30g batch) 15 minutes

FX Rock Hard Epoxy Bonding Resin 2 oz $7.98 When you want solid hold for your hair bond it with Rock Hard Epoxy Bonding Resin. Indestructable hold for any hair style you want. Rock hard hold for your hard rock style.

Case of FX Rock Hard Epoxy Bonding Resin 2 oz $24.03 When you want solid hold for your hair bond it with Rock Hard Epoxy Bonding Resin. Indestructable hold for any hair style you want. Rock hard hold for your hard rock style.

West System #105 Epoxy Resin 404e High Density, Load $4579 West System #105 Epoxy Resin 404e High Density, Load . 105 Epoxy Resin: The key component in a wide variety of boatbuilding, restoration, and repair projects 105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. The resin is a clear, light amber, low-viscosity liquid epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without “fisheyeing.” The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high

West System G/flex 655 Epoxy Kits Resin 4.75 Gal. $494.99 West System G/flex 655 Epoxy Kits Resin 4.75 Gal. . G/flex 655 is a new epoxy introduced by WEST SYSTEM in mid-June 2007 . G/flex is a tough, resilient epoxy engineered for a superior grip to metals, plastics, glass, masonry, fiberglass, and wet and difficult-to bond woods. G/flex 655 Thickened Epoxy Adhesive comes with a thickening agent already added. G/flex offers important features: Toughness and Flexibility G/flex has been toughened. This gives G/flex the ability to make structural bonds that can absorb the stresses of expansion, contraction, shock, and vibration. G/flex is resilient and impact resistant. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. Bonds to wet and damp surfaces G/flex has the ability to glue damp woods. It can be used on wet surfaces, even underwater when

Peel & Stick Epoxy Eyelets-Metallics $2.99 eyelets stickers epoxy cloud 956 piecesSelf-AdhesiveWelcome to the world of rain dots! Cloud 9 Rain Dots Sticker eyelets are transparent self-adhesive resin accent embellishments that look like Rain Drops. These dimensional resin stickers are the perfect touch to your scrapbook pages cards and other pape

Peel & Stick Epoxy Eyelets-Purples $2.99 eyelets stickers epoxy cloud 956 piecesSelf-AdhesiveWelcome to the world of rain dots! Cloud 9 Rain Dots Sticker eyelets are transparent self-adhesive resin accent embellishments that look like Rain Drops. These dimensional resin stickers are the perfect touch to your scrapbook pages cards and other pape

Peel & Stick Epoxy Eyelets-Greens $2.99 eyelets stickers epoxy cloud 956 piecesSelf-AdhesiveWelcome to the world of rain dots! Cloud 9 Rain Dots Sticker eyelets are transparent self-adhesive resin accent embellishments that look like Rain Drops. These dimensional resin stickers are the perfect touch to your scrapbook pages cards and other pape

Peel & Stick Epoxy Eyelets-Neutrals $2.99 eyelets stickers epoxy cloud 956 piecesSelf-AdhesiveWelcome to the world of rain dots! Cloud 9 Rain Dots Sticker eyelets are transparent self-adhesive resin accent embellishments that look like Rain Drops. These dimensional resin stickers are the perfect touch to your scrapbook pages cards and other pape

Peel & Stick Epoxy Eyelets-Pinks $2.99 eyelets stickers epoxy cloud 956 piecesSelf-AdhesiveWelcome to the world of rain dots! Cloud 9 Rain Dots Sticker eyelets are transparent self-adhesive resin accent embellishments that look like Rain Drops. These dimensional resin stickers are the perfect touch to your scrapbook pages cards and other pape

Quikrete? Epoxy Garage Floor Coating $84.95 QUIKRETE? products contain a special resin technology that works to maximize the bond between the floor coating and the concrete. This bond is 2-times stronger than the concrete itself, extending the life of your finish and giving you maximum durability.     Features: 2-times stronger than concrete for the toughest garage floor One coat gives a beautiful semi-gloss finish Durable high solids 2-part water-based epoxy One kit covers 250 square feet Available in light gray or tan     Application: STEP 1: Prepare Concrete surface using BOND?LOK? to clean, degrease and etch. STEP 2: Apply Epoxy Floor Coating Apply the epoxy in 2′ x 6′ sections using a premium-quality roller. Distribute the decorative flakes as you work your way out of the garage. You can walk on the surface in 12 hours, replace items in 24 hours and drive on it in 3 days.

Redtree Industries Resin Roller, 7 Wide $6.99 Redtree Industries Resin Roller, 7″ Wide . Resin Roller, 7″ Wide. Long nap and smooth surface for epoxy and fiberglass resin.

West System G/flex 655 Epoxy Kits 655, 2 Qt. (one 1 Can Of Resin, Hardener) $79.99 West System G/flex 655 Epoxy Kits 655, 2 Qt. (one 1 Can Of Resin, Hardener) . G/flex 655 is a new epoxy introduced by WEST SYSTEM in mid-June 2007 . G/flex is a tough, resilient epoxy engineered for a superior grip to metals, plastics, glass, masonry, fiberglass, and wet and difficult-to bond woods. G/flex 655 Thickened Epoxy Adhesive comes with a thickening agent already added. G/flex offers important features: Toughness and Flexibility G/flex has been toughened. This gives G/flex the ability to make structural bonds that can absorb the stresses of expansion, contraction, shock, and vibration. G/flex is resilient and impact resistant. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. Bonds to wet and damp surfaces G/flex has the ability to glue damp woods. It can be used on wet surf

ArtResin.com – Thick, Glossy, Clear Coat on your Paintings (Epoxy Resin)