Pipe Clamp

Pipe Clamp

GT sensors stable but overweight mount

Concrete Pipe and Hose with clamps and slurry mix $3,500.00

Logging or Pipe Clamp Forks $3,000.00

NEW LOT B-LINE COOPER CONDUIT PIPE CLAMPS VIBRACLAMP $999.95

LTU TRANSIT & MANHOLE MOUNT FOR PIPE LASER LEVEL ,TOPCON,SPECTRA PRECISION,AGL $749.00

Sumner 784103 Internal Fit-Up Clamp, 8-12″ Pipe Clamp $613.71

PIPE FASTERNAL E-Z12 for 9-12″ Dia Pipe EZ Fit Pipe Clamp used $399.99

Fein Large Pipe Clamp 90702004006 NEW $379.99

Mathey Dearman Pipe Chain Clamp $369.99

Fein Small Pipe Clamp 90702001001 NEW $319.99

Dresser 360 series underground pipe repair clamp stainless 0360-1064-010 new NIB $250.00

REED CHAIN WELDING CLAMP CLAMPING VISE FOR RIDGID PIPE THREADING TOOL $249.99

RIDGID BENCH YOKE VISE 3″ CAPACITY PIPE CLAMP #40090 $199.99

RIDGID BENCH YOKE VISE 4″ CAPACITY PIPE CLAMP #40100 $189.99

RIDGID CHAIN VICE SOIL PIPE CLAMP ASSEMBLY APPROX. 10″ CAPACITY C-1071 $189.00

10″ x 12″ Stainless Steel Full Wrap Pipe Clamp New! $161.99

(41) ERICO LIGHTNING PROTECTION GROUNDING PIPE CLAMPS $149.99

RIDGID Model 228 Soil Pipe Assembly Tool Clamp Chain Lever $144.90

THE COLUMBIAN HWE CO ADJUSTABLE PIPE CLAMP 15″ OAL $139.99

MATHEY DEARMAN E-Z 2 EZ FIT PORTABLE PIPE 1″ – 2.5″ WELDER CLAMP ALIGNMENT GR8! $134.95

AGL Manufacturing Concrete Boom Pipe Snap Clamp Couplings w/Gaskets 2.5″ HD (12) $129.00

ROMAG IND STAINLESS SEAL PIPE REPAIR CLAMP 13.15 -13.55 $119.99

JCM Pipe Repair Clamp, Stainless, 8″ CI diameter x 12″ Long, #101-905-12, New $109.65

3/8″ EMT 1/4″ Pipe and 1/2″ O.D. Tubing Kindorf /Unistrut strut pipe strap clamp $100.00

8″ Central-Sprink 705 Flange Clamp Central Sprink Grooved Pipe Coupling $100.00

ROBAR 1320-2X16 1320-1395 STAINLESS REPAIR PIPE COUPLING CLAMP 13X16IN 47065 $99.99

16 NEW UL LISTED TOLCO 3″ X 1″ FIG 1000 FAST CLAMP SWAY BRACE PIPE ATTACHMENT $99.99

Watts WP9S 1-Inch Stainless Steel Cinch Clamp for 1-Inch PEX Pipe 100 PACK $99.99

(500) Oatey 1″ half Clamp W/ Barbed Nail Plumbing Pipe CPVC Copper PEX Holder $99.99

Ridgid Pipe Clamp Puller $99.00

Ridgid Pipe Clamp Puller $99.00

ROMAC SS1 Pipe Repair Clamp 5.14 x 8 $98.00

Generic Universal Conduit Pipe Clamps 3/4″ LOT of 190 $93.49

Ford Meter Box Pipe Repair Clamp, Stainless 8″ CIP x 15″ Long, F1-939×15, New $92.65

SMITH-BLAIR PIPE REPAIR CLAMP 226-00023812-000 12.5″OR 317mm WIDTH NEWOUT BOX $89.99

(1000) 3/4″ Plastic Pipe Clamps Straps for PEX, Copper $89.95

ROBAR 1105-2 STAINLESS REPAIR PIPE COUPLING CLAMP 10X16IN 47066 $84.99

JCM Pipe Repair Clamp, All Stainless 8″ CI diameter x 7″ Long, #131-0905-7, New $84.15

Thomas & Betts C109 1 Channel Angler Pipe Clamp 100Pk $80.75

VICTAULIC 2″/60 3-005H GASKET CLAMP FITTING pipe joint $80.00

NEW ROBAR 5616 ALL STAINLESS REPAIR PIPE CLAMP 6X 16IN GASKETED TORQUE 80 FT/LBS $79.99

(1000) 1/2″ Plastic Pipe Clamps Straps for PEX, Copper $79.95

Ford Meter Box Pipe Repair Clamp, Stainless 12″ CIP x 7.5″ L, F1-1350×7.5, New $76.42

JCM Pipe Repair Clamp, Stainless steel, 8″ CIP x 7.5″ Long, # 101-0905-7, New $75.65

JCM Pipe Repair Clamp, Stainless 10″ CI x 7.5″ L, New $75.65

JCM Pipe Repair Clamp, Stainless Steel, 4″ CI x 15″ L, # 101-0480-15, New $75.65

VICTAULIC 1 1/4″/42 4-005H GASKET CLAMP FITTING pipe jt $75.00

Pipe Threader Ratchet Type with 5 dies + Pipe Cutter # 2 + Clamp on Pipe Vise #1 $74.99

Premier Mounts PP-FCMA-QL Ceiling Adapter $97.49 Premier Mounts PP-FCMA-QL Ceiling Adapter

Pipe Clamp

Pearl PCX100 Pipe Clamp $29.99 Pearl PCX100 Pipe Clamp

Pearl PCX200 Pipe Clamp $34.99 Pearl PCX200 Pipe Clamp

Pearl PCX100 Pipe Clamp Standard $29.99 Icon pipe clamp with adjustable jaw.

Pearl Pcx200 Pipe Clamp $34.99 The Pearl PCX200 pipe clamp includes a tilting system with adjustable jaw.

Pearl PCX200 Pipe Clamp Standard $34.99 Icon pipe clamp with tilting clamp system and adjustable jaw.

Pearl Pc-8 Pipe Clamp $19.99 The Pearl PC-8 pipe clamp fits 7/8″ percussion hardware tubes. For the Pearl DR-80 rack.

Pearl Pcx100 Pipe Clamp $29.99 The Pearl PCX100 pipe-clamp has adjustable jaws to work with Pearl Icon/110/210 drum hardware.

Pipe Clamp by WAC Lighting $22.5 The WAC Lighting Pipe Clamp designed to work on pipes enable you to mount lights and get the proper aesthetic view. The Pipe Clamp features dark brown finish. WAC Lighting, founded in 1984, has developed a strong reputation for high quality decorative and task lighting. Based in Garden City, New York, WAC Lighting is a leading manufacturer of low voltage, line voltage and LED lighting, including track systems, transformers, lamps, cabinet lighting and recessed downlights. Shipping: This item usually ships within three- to five business days. Dimensions: Clamp: Diameter Adjustable from .5 In. to 2.5 In.

Pearl PC-8 Pipe Clamp Standard $19.99 This pipe clamp designed for the Pearl DR-80 Rack System and is used for mounting 7/8″ tom and cymbal holders. Sturdy construction and made of high-quality materials.

Pearl PCL-100 Pipe Leg Clamp for ICON Series Racks $19.99 Pearl PCL-100 Pipe Leg Clamp for ICON Series Racks

Chief CMA Pipe Clamp Adapter $105.99 300 lb 5 Year CMA Pipe Clamp Adapter 2 x 5/16-18 x 3 ¼” Hx.Soc.Hd.Cp. Screw 2 x 5/16-18 x 1 ¼” Hx.Soc.Hd.Cp. Screw 2 x 5/16-18 x 4 ¼” Hx.Soc.Hd.Cp. Screw 2 x 5/16-18 x 2 ¼” Hx.Soc.Hd.Cp. Screw 1 x Set Screw 4 x 5/16-18 Nylock Nuts 1 x Allen Wrench, 5/32″ 4 x ¼” Washer, Flat, Black 1 x Allen Wrench ¼” CMA-300 clamps onto horizontal pipe from 1 9/10″ to 3 1/2″. Allows cable access. Attaches to 1 1/2″ NPT threaded extension column. Projector CMA CMA Pipe Clamp Adapter CMA-300 Chief Chief Manufacturing Mounting Adapter Kit Projector Steel www.chiefmfg.com

Patriot Exhaust Lake Pipe Clamp – HPC175 $8.99 MPN #HPC175. Patriot Exhaust Lake Pipe Clamp. Most Exhaust products are available for in-store pickup from Advance Auto Parts.

Patriot Exhaust Lake Pipe Clamp – HPC200 $8.99 MPN #HPC200. Patriot Exhaust Lake Pipe Clamp. Most Exhaust products are available for in-store pickup from Advance Auto Parts.

Field Guardian Pipe Clamp Insulator 12pk Black $10.49 Field Guardian(R) Pipe Clamp Insulators (12-Packs) Install this insulator and get your horses’ respect by mounting a scare wire. Our special insulator attaches to the side of your pipe panels without drilling a hole in the pipe. The clamp can be mounted on the horizontal or vertical section of the panel. The hot wire can be positioned as needed, a point midway up is preferred, although stallions may need a high wire to keep them from “necking” over the fence. Place it on both sides of adjoining pastures to reduce horse mischief to a minimum. We strongly suggest using polyrope or 1/2″ tape to prevent injuries caused by hot wire. These insulators are an economical and practical way to protect your pipe panel fences. Sizes and specifications The pipe clamp insulators are 3.5″ inches in length and they adjust for pipe diameters from 1 1/2″ up to 1 5/8″. (In order to make them fit 1 7/8″ pipes, you will need to get 1.5″ screws – not included in these). These sizes should fit most pipe panels, heavy duty fences as well as some cyclone fence posts. The pipe clamps are constructed of a high grade of poly plastic with UV inhibiters and flex agents added. This means that they will last for years without cracking; however, this also means that they cost a bit more than T-post style snap on insulators. Installation Instructions Select the location for the insulator. Snap the clamp over the pipe. If you are using the clamp on small diameter pipe, use the short screw in the top hole. If you are using it on a 1 7/8″ pipe, use the longer screw in the bottom hole. Tighten the screw to fix the position on the pipe. Do not over-tighten.

Field Guardian Pipe Clamp Insulator 12pk White $10.49 Field Guardian(R) Pipe Clamp Insulators (12-Packs) Install this insulator and get your horses’ respect by mounting a scare wire. Our special insulator attaches to the side of your pipe panels without drilling a hole in the pipe. The clamp can be mounted on the horizontal or vertical section of the panel. The hot wire can be positioned as needed, a point midway up is preferred, although stallions may need a high wire to keep them from “necking” over the fence. Place it on both sides of adjoining pastures to reduce horse mischief to a minimum. We strongly suggest using polyrope or 1/2″ tape to prevent injuries caused by hot wire. These insulators are an economical and practical way to protect your pipe panel fences. Sizes and specifications The pipe clamp insulators are 3.5″ inches in length and they adjust for pipe diameters from 1 1/2″ up to 1 5/8″. (In order to make them fit 1 7/8″ pipes, you will need to get 1.5″ screws – not included in these). These sizes should fit most pipe panels, heavy duty fences as well as some cyclone fence posts. The pipe clamps are constructed of a high grade of poly plastic with UV inhibiters and flex agents added. This means that they will last for years without cracking; however, this also means that they cost a bit more than T-post style snap on insulators. Installation Instructions Select the location for the insulator. Snap the clamp over the pipe. If you are using the clamp on small diameter pipe, use the short screw in the top hole. If you are using it on a 1 7/8″ pipe, use the longer screw in the bottom hole. Tighten the screw to fix the position on the pipe. Do not over-tighten.

Chief CMA C-Clamp Pipe Mount $68.99 250 lb 5 Year CMA C-Clamp Pipe Mount Includes: 1 x C-Clamp Assembly 2 x (3/8-16 X 5″) Hex Head Cap Screw 2 x 3/8-16 Nylock Nut 1 x 3/8-16 Hex Nut 1 x (3/8-16 x 4.5″) Hex Head Tap Bolt 1 x (10-24 x ¼”) Set Screw 1 x 3/32″ Allen Wrench CMA-362 clamps to any structure up to 2 3/4″ OD (including 2″ x 4″ structures) and includes an opening for 1-1/2″ NPT extension column. Provides quick, versatile installation of presentation equipment and allows cable routing through the column. Especially advantageous for mounting equipment in exhibit booths. Projector UL CMA CMA C-Clamp Pipe Mount CMA-362 Chief Chief Manufacturing Clamp Mount Projector Steel www.chiefmfg.com

Bessey H Series Pipe Clamp Review